|
|
Wind Turbine Towers |
|
Southwest Windpower | Bergey |
Contact Us | Home | About Us
|
|
Bergey Tubular Guyed Towers |
|||||
|
The BWC Tilt. Tower is the most complete, out-of-the-box, user-friendly tower system for a small wind turbine on the market today. It is available exclusively for use with the 1 kW BWC XL.1 wind turbine. The Tilt Tower is a guyed tilting tower that allows all work to be done at ground level and it is available in heights from 30 ft. to 104 ft. The Tilt.Tower is ruggedly built and comes with the longest warranty (5 years) in the industry. All tower kits include galvanized tubular tower sections, guy anchors, guy wires and associated hardware, and gin-pole. Tower electrical wiring is not included.
30’ - 42’ tower kits utilize 6.6-foot X 3.5” dia. tower sections and are UPS shippable.
64’ - 104’ tower kits utilize 10-foot X 4.5” dia. tower sections and must ship via truck, no UPS. |
||||||
|
30’ Tubular Tower |
||||||
|
Model |
Wind Turbine Size |
Tower Height |
Guy System Radius |
Anchor Type |
Weight (lbs) |
Part Number |
|
1TU9 |
1KW |
30’ |
19’ |
Auger |
|
1TU9 |
|
1TU 13 |
1KW |
42’ |
19’ |
Auger |
|
1TU 13 |
|
1TU 19 |
1KW |
64’ |
35’ |
Auger |
|
1TU 19 |
|
1TU 25 |
1KW |
84’ |
50’ |
Auger |
|
1TU 25 |
|
1TU 32 |
1KW |
104’ |
60’ |
Auger |
|
1TU 32 |
|
1TRK |
Tower raising Kit |
|
|
|
|
1TRK |
|
|
Bergey Guyed Lattice Towers |
|||||
|
Bergey guyed lattice towers are the most cost effective tower solution for the 10KW turbines. These towers are not for tilt-up installation and must be set by crane.
Tower kits include Bergey galvanized 3m (10 ft) lattice type tower sections and associated hardware, guy anchors, guy wires and associated hardware, furling cable and furling winch mounting hardware, special tower grounding hardware, and ground rods. Tower wiring is not included.
|
||||||
|
Lattice Tower |
||||||
|
Model |
Wind Turbine Size |
Tower Height |
Guy System Radius |
Anchor Type |
Weight (lbs) |
Part Number |
|
XLG18 |
10KW |
60’ |
|
|
|
XLG18 |
|
XLG24 |
10KW |
80’ |
|
|
|
XLG24 |
|
XLG30 |
10KW |
100’ |
|
|
|
XLG30 |
|
XLG37 |
10KW |
120’ |
|
|
|
XLG37 |
|
|
Bergey Tilt-Up Lattice Towers |
|||||
|
The Bergey Tilt-Up tower combines the strength of a lattice tower with the ability to raise and lower the turbine without the need of a crane.
Tower kits include Bergey galvanized 3m (10 ft) lattice type tower sections and associated hardware, guy anchors, guy wires and associated hardware, furling cable and furling winch mounting hardware, special tower grounding hardware, and ground rods. Tower wiring is not included.
· Jack Stand is a support stand for lowered tower · Raising Kit includes 5:1 pulley blocks and cable for raising tower. |
||||||
|
Tilt-Up Tower |
||||||
|
Model |
Wind Turbine Size |
Tower Height |
Guy System Radius |
Anchor Type |
Weight (lbs) |
Part Number |
|
XLGT18 |
10KW |
60’ |
|
|
|
XLGT18 |
|
XLGT24 |
10KW |
80’ |
|
|
|
XLGT24 |
|
XLGT30 |
10KW |
100’ |
|
|
|
XLGT30 |
|
XLJS |
Jack Stand |
|
|
|
|
XLJS |
|
XLTRK |
Raising Kit |
|
|
|
|
XLTRK |
|
|
Bergey Self-Supporting Lattice Towers |
|||||
|
Self-Supporting Lattice towers are excellent when height is required and guy wires are out of the question.
Tower kits include Rohn SSV galvanized 6m (20 ft) lattice type tower sections and associated hardware, J-bolt anchors, furling cable and furling winch mounting hardware, special tower grounding hardware, and ground rods. Tower wiring is not included. |
||||||
|
Self Supporting Tower |
||||||
|
Model |
Wind Turbine Size |
Tower Height |
Guy System Radius |
Anchor Type |
Weight (lbs) |
Part Number |
|
XLSS18 |
10KW |
60’ |
N/A |
N/A |
|
XLSS18 |
|
XLSS24 |
10KW |
80’ |
N/A |
N/A |
|
XLSS24 |
|
XLSS30 |
10KW |
100’ |
N/A |
N/A |
|
XLSS30 |
|
XLSS37 |
10KW |
120’ |
N/A |
N/A |
|
XLSS37 |
|
|
|
|
|
|
|
|
Contact Us | Home | About Us