Inverters

Vanner | Outback | Genius | Trace 1| Trace 2 | Exeltech | Sunny Boy

Trace Power Panel series

Visit Trace

Power Panels are Trace’s first packaged power system. They are less expensive than an onsite component installation and meet many power application needs. To install Power Panels, simply connect them to the battery, PV and or AC loads. Power Panels include inverters and are assembled by Trace with components specified by the customer.

Features include:

• One or two Trace SW or DR inverters

• Powder coated steel back-plate pre-wired with all NEC/UL requirements, AC & DC over current protection and disconnects: only for indoor installation

• Negative/ground bonding block

• Single or dual C40 charge controllers for use DC charging sources

• Optional nonmetallic battery enclosure which doubles as a shipping enclosure

• Flexible conduit for connection of the system to the battery enclosure

• 60 amp AC system bypass that allows inverter servicing while keeping AC loads connected to the grid or generator

Trace SW Power Panel

Inverter Pricing

Model

 DC Voltage

Continuous Pwr. Watts

AC Output Voltage

Charger Amps

Dimensions LxWxH

Weight (lbs)

Part Number

PP-DR3624/S

24V

3600

120VAC 60Hz

70 A

1” x 43” x 40”

95

150024PPDR3624S

PP-DR3624/D

24V

7200

120/240VAC 60Hz

70 A x 2

1” x 43” x 40”

120

150024PPDR3624D

PP-DR2424/S

24V

2400

120VAC 60Hz

70 A

1” x 43” x 40”

90

150024PPDR2424S

PP-DR1524/S

24V

1500

120VAC 60Hz

35 A

1” x 43” x 40”

85

150024PPDR1524S

PP-SW5548D

48V

11000

120/240VAC 60Hz

70 A x 2

1” x 43” x 40”

290

150048PPSW5548D

PP-SW4048D

48V

8000

120/240VAC 60 Hz

60 A x 2

1” x 43” x 40”

334

150048PPSW4048D

PP-SW5548S

48V

5500

120VAC 60 Hz

70 A

1” x 43” x 40”

248

150048PPSW5548S

PP-SW4024/S

24V

4000

120VAC 60Hz

120 A

1” x 43” x 40”

155

150024PPSW4024S

PP-SW4048S

48V

4000

120VAC 60 Hz

60 A

1” x 43” x 40”

217

150048PPSW4048S

Accessories

PPO-C40

C40 DC charge or load or diversion controller, installed complete with prewired 60 amp DC breaker

152ACCPPOC40

PPO-DVM/C40

Accumulating amp hour meter with LCD display, installed on the front of the C40

152ACCPPODVMC40

PPO-CD15

15 amp DC load breaker, prewired and installed in the DC disconnect

152ACCPPOCD15

PPO-CD20

20 amp DC load breaker, prewired and installed in the DC disconnect

152ACCPPOCD20

PPO-CD60

60 amp DC load breaker, prewired and installed in the DC disconnect

152ACCPPOCD60

PPO-BC5-2/0

5 ft., 2/0 AWG battery cable pair with ring terminals (battery side only) and 2 ft flexible conduit

152ACCPPOBC52/0

PPO-BC10-2/0

10 ft., 2/0 AWG battery cable pair with ring terminals (battery side only) and 7 ft flexible conduit

152ACCPPOBC1020

PPO-BC5-4/0

5 ft., 4/0 AWG battery cable pair with ring terminals (battery side only) and 2 ft flexible conduit

152ACCPPOBC54/0

PPO-BC10-4/0

10 ft., 4/0 AWG battery cable pair with ring terminals (battery side only) and 7 ft flexible conduit

152ACCPPOBC1040

PPO-BC15-4/0

15 ft., 4/0 AWG battery cable pair with ring terminals (battery side only) and 12 ft. flexible conduit

152ACCPPOBC1540

PPO-SB

Heavy duty plastic shipping container

152ACCPPOPPOSB

Also available (not shown) 50hz models. Call for pricing and availability.

Other Trace Accessories

Visit Trace

Inverter Pricing

Model

Description

Weight (lbs)

Part Number

T240

120-240 volt step-up or step-down transformer, maximum continuous power 3.9kVA w/ built-in dual pole 25 amp circuit breaker disconnect.

152ACCT240

BTS/15

Battery temperature sensor with 15’ cable for DR, SW, PS and UX series

152ACCBTS/15

BTS/35

Battery temperature sensor with 35’ cable for DR, SW, PS and UX series

152ACCBTS/35

RC8/50

Remote on/off control with status LED indicator for all DR, PS, TS and UX series with 50’ cable

152ACCRC8/50

RC8/100

Remote on/off control with status LED indicator for all DR, PS, TS and UX series with 100’ cable

152ACCRC8/100

PVGFP1

Ground fault protection, one pole for one solar array, no enclosure, 100 amp DC max .

152ACCDCPVGFP1

PVGFP2

Ground fault protection, two pole for two solar sub-arrays, no enclosure, 100 amp DC max /pole.

152ACCPVGFP2

DC250

250 amp DC breaker with enclosure - for SW4024, SW5548, PS2212, PS2512, DR3624, DR2412

152ACCDC250

DC175

175 amp DC breaker with enclosure - for SW4048, PS 2524, DR1512, DR1524, DR2424

152ACCDC175

GJ250

Additional 250 amp breaker (field installable) for a second, stacked or unstacked SW or DR inverter

152ACCGJ250BRKR

GJ175

Additional 175 amp breaker (field installable) for a second, stacked or unstacked SW or DR inverter

152ACCGJ175BRKR

DCBB

Negative/ground bonding block - connects up to two #4/0 AWG negative cables and ground system cables

152ACCDCBB

CD60DC

60 amp circuit breaker for solar array input disconnect for C40 – mounts on side of DC250/175

152ACCPPOCD60

CD15

15 amp circuit breaker for small DC load - mounts on side knockout of DC disconnect enclosure

152ACCCD15

CD20

20 amp circuit breaker for small DC load - mounts on side knockout of DC disconnect enclosure

152ACCCD20

BC3-2/0

2/0 - 3 foot cable pair, w/ red and black heatshrink

152ACCBC3-2/0

BC5-2/0

2/0 - 5 foot cable pair, w/ red and black heatshrink

152ACCBC5-2/0

BC10-2/0

2/0 - 10 foot cable pair, w/ red and black heatshrink

700KIT2/0RB120D

BC3-4/0

4/0 - 3 foot cable pair, w/ red and black heatshrink

152ACCBC3-4/0

BC5-4/0

4/0 - 5 foot cable pair, w/ red and black heatshrink

152ACCBC5-4/0

BC10-4/0

4/0 - 10 foot cable pair, w/ red and black heatshrink

152ACCBC10-4/0

BC15-4/0

4/0 - 15 foot cable pair, w/ red and black heatshrink

152ACCBC15-4/0

BC1.5B-2/0

2/0 - 1.5 foot cable, w/ black heatshrink (-)

700KIT2/0BB18D

BC1.5RB-2/0

2/0 - 1.5 foot cable pair, w/ red/black heatshrink (+/-)

700KIT2/0RB18D

BC1.5R-4/0

4/0 - 1.5 foot cable, w/ red heatshrink (+)

700KIT4/0RR18D

BC1.5B-4/0

4/0 - 1.5 foot cable, w/ black heatshrink (-)

152ACCBC18B-4/0

BC1.5RB-4/0

4/0 - 1.5 foot cable pair, w/ red/black heatshrink (+/-)

700KIT4/0RB18D